Spiral Corrugated Pipe Machine

This machine line is for producing round air duct for various uses, such as for posttension pipe, drainage pipe, pile shell, ventilation duct, etc.

Advantages

1.1 Special welded steel mould, light & long life.

1.2 Cut by plasma cutting device with auto height adjustment sensor.

1.3 Large diameter range

1.4 PLC control, convenient operation

1.5 Auto unloading rack, lower labor cost

Main Technical Data

2.1 Diameter of round tubes: 300mm ~ 1000mm.

2.2 Max. Tube length: 10000mm.

2.3 Thickness of strip: 1.3mm-2.0mm

2.4 Width of strip: 155mm (exact strip width based on machine design)

2.5 Strip speed: 1~35m/min, adjustable

2.6 Suitable strip material: galvanized steel

2.7 Weight: 2500kg

2.8 Power of main motor: 22kw

2.9 Power of hydraulic motor: 0.75kw

2.10 Power of cooling water pump motor: 125W

2.11 Power of material feeding motor: 125W

Main Configuration

3.1 Uncoiler: mechanical expanding type, capacity 1200kg, inner diameter range 480-610mm, outer diameter 1000mm.

3.2 Control system: Mitsubishi inverter, PLC control

3.3 Driving system: Spiral subulate gear type decelerator (low noise, large moment)

3.4 Material of forming rollers: GCr15 bearing steel, quenched, HRC58-62

Accessories accompanied with the machine

4.1 Unloading rack: one set, 3000mm long.

4.2 Four press-adjusting rollers (changed to suit different thickness)

4.3 One set of special tools.

http://www.spiral-forming.com/