TPE Flame Retardant Masterbatch (FR-TPE500)
Delivery term:The date of payment from buyers deliver within days- Price:
Negotiable
- minimum:
- Total supply:
- Delivery term:
The date of payment from buyers deliver within days
- seat:
Beijing
- Validity to:
Long-term effective
- Last update:
2017-12-24 10:19
- Browse the number:
374
- Suzhou Haixiang Plastic Chemical Co.,Ltd By certification [File Integrity]
-
Contact:
haixiang(Mr.)
- Email:
- Telephone:
-
Area:
Beijing
-
Address:
Yuanzhong Bridge West, Guangfu Town Industrial Zone, Wuzhong District, Suzhou, Jiangsu, China
- Website: http://www.sz-flameretardant.com/ http://haixiang.mingzhuqizhong.com/
Product details
Introduction
FR-TPE500 consists of environment friendly flame retardant system of bromine and antimony, developed for TPE (thermoplastic elastomer). Mainly used in insulated cable (TPE, TPV, TPR or TPU), low dosage and high performance. FR-TPE500 can pass UL1581VW-1 test, and it is not limited by the Directive 2002/95/EC of the European Parliament and of the Council on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. Advantage: good gloss, non-blooming, good water resistance, excellent transference resistance, good electric performance.
Index
Item |
Index |
Appearance |
White Granular |
Content %> |
70 |
Density g/cm3 |
2.13 |
Melt Index g/min,220℃5kg |
3.4 |
Water Content %≤ |
0.1 |
Decomposition Temp ℃≥ |
300 |
Extrusion Process (Twin Screw Extruder)
Packing/Storage
25KG/bag: Transported as a common chemical and stored in dry and cool place, avoid direct sunlight.
Appendix:Application Examples
1-1.Formula
Materials |
Formula |
TPE |
90 |
FR-TPE500 |
10 |
1-2.Technical Data
Properties |
Test Methods |
Unit |
TPE raw material |
Formula |
Density |
ASTM D-792 |
g/cm3 |
1.10 |
1.15 |
Hardness |
ASTM D-2240 |
Shore A |
3 |
5 |
Melt Index (200℃/2.16KG) |
ASTM D-955 |
g/10min |
87 |
- |
Tensile Strength |
ASTM D-638 |
MPa |
8.2 |
12 |
Elongation At Break |
ASTM D-638 |
% |
757.2 |
820.2 |
Retardancy 0.1mm |
UL 1581 |
-- |
VW-1 |
VW-1 |
1-3. Injection Process:
Drying condition: Drying at 100 deg C to 2-3 hours by desiccant dryers.
Extruder: use general extruder, screw L/D 25:1, compression ratio 3.
Injection machine temperature setup:
Heating Zone |
Step1 |
Step2 |
Step3 |
Nozzle |
Temperature |
175 |
185 |
190 |
185 |
Note:
1.All the application typical data above are just for reference, not an official warranty certificate.
2. Provide different design solutions according to requirement of customers.
-
PL1000 Rock Drilling and Splitting Machine
price: Negotiable
-
Sturdy Work Boots
price: Negotiable
-
Mixer Settler Liquid Liquid Extraction
price: Negotiable
-
Mixer Settler Extractor
price: Negotiable
-
Single Blade Disposable Razor with Comb
price: Negotiable
-
Y81F-200 Turn-out Hydraulic Scrap Metal Baler
price: Negotiable